Anti-Wear Hydraulic Oil ISO 46

$208.05

Anti-Wear Hydraulic Oil ISO 46

Texas Refinery Corp’s Anti-Wear Hydraulic Oil ISO 46 was developed to fill a need in the market by offering a fantastic long lasting 6,500-hour hydraulic oil that our customers need at a price point that makes sense. Our Anti-Wear Hydraulic Oil ISO 46 is loaded with additives enhancing its load carrying ability prolonging pump and hydraulic system life. Anti-Wear Hydraulic Oil ISO 46 contains anti-corrosion and anti-rust additives to protect against moisture which may be present in hydraulic systems. Like other TRC fluids, Anti-Wear Hydraulic Oil ISO 46 has outstanding thermal and oxidative stability which extends the life of the fluid. Anti-Foam inhibitors promote rapid air release minimizing pump cavitation and pre-mature wear. Because we use high viscosity base stocks, viscosity changes with temperature are minimized – providing smooth operation. Finally, we offer excellent demulsibility. Additives are used allowing Anti-Wear Hydraulic Oil ISO 46 to reject water to the bottom of the reservoir. Dump the “yellow bucket” hydraulic oil today, and upgrade to real protection with Anti-Wear Hydraulic Oil ISO 46.

  • PROLONGED SYSTEM LIFE
  • OUTSTANDING THERMAL AND OXIDATIVE STABILITY
  • HIGH VISCOSITY INDEX BASE STOCKS
  • EXCELLENT DEMULSIBILITY
DOWNLOAD PDS
REQUEST SDS

SKU: 108823-4055

Anti-Wear Hydraulic Oil ISO 46

  • REDUCES COSTLY WEAR
  • RESISTS CHEMICAL
    BREAKDOWN
  • PROTECTS SEALS
  • RESISTS FOAMING
  • RUST PROTECTION
  • DEPENDABLE

ANTI-WEAR HYDRAULIC OIL Reduces Costly Wear

ANTI-WEAR HYDRAULIC OIL is a high quality, stable product formulated to provide excellent performance. Increased protection against surface wear is accomplished with the use of ANTI-WEAR HYDRAULIC OIL – – it forms a film on metal surfaces, reducing metal to metal contact. Texas Refinery Corp. incorporates more zinc (an anti-wear additive) into its ANTI-WEAR HYDRAULIC OIL, than is required on most equipment specifications – – an extra step to prolong the life of equipment. Reducing friction wear often reduces operating temperatures and that in turn helps increase the life of the oil and the equipment.

ANTI-WEAR HYDRAULIC OIL Resists Chemical Breakdowns

ANTI-WEAR HYDRAULIC Oils are subjected to many problem-causing factors – – high temperatures , water, air, and foreign debris. This combination leads to oxidation, producing sludge, varnish, acids, eventually a thick gummy material in the oil. To prevent this, Texas Refinery Corp. manufactures ANTI-WEAR HYDRAULIC OIL from new generation base oils which have a high stability and then TRC boosts the stability even further with extra portions of powerful antioxidation additives. In an oxidation test, ANTIWEAR HYDRAULIC OIL performed satisfactorily for over 6,500 hours, in most grades – – better than two times the target normally sought.

ANTI-WEAR HYDRAULIC OIL Protects Seals

A hydraulic piston operates under high pressure, requiring a lubricant which reduces friction of the seal material, without damage to the seal itself. ANTI-WEAR HYDRAULIC OIL is formulated with the most up-to-date additives to protect seals. Friction is reduced and longer service life is obtained. This savings is accomplished by using superior quality oils and additives used in Texas Refinery Corp.’s ANTIWEAR HYDRAULIC OIL formulation.

ANTI-WEAR HYDRAULIC OIL Resists Foaming

For peak efficiency, hydraulic systems must use an uncontaminated oil as an operating medium. Water contamination, among other things, causes foaming, especially where elevated temperatures are encountered. Also, air entrapped in the system, can cause a foaming problem. Texas Refinery Corp.’s ANTI-WEAR HYDRAULIC OIL contains special anti-foam chemistry in large amounts, so the fluid releases any air or water that may be causing the foam. Reducing foam also decreases heat, and improves the life of the oil and the equipment.

ANTI-WEAR HYDRAULIC OIL Protects Against Rust

If an oil is formulated properly, metals should not rust, even if moisture is present. ANTI-WEAR HYDRAULIC OIL has the special additives in large quantities to protect metal surfaces from rust. The film forming chemistry, coats all metal surfaces with a thin film, preventing moisture and other rust promoters from reaching the surfaces. With the use of ANTI-WEAR HYDRAULIC OIL, the worries of rust are over.

ANTI-WEAR HYDRAULIC OIL Is Dependable

An inferior ANTI-WEAR HYDRAULIC OIL becomes thick when cold and cause a pump to cavitate. When weather is hot, the oil becomes thin, causing a loss around the seals. The thin oil also tends to accelerate wear and give other problems. ANTI-WEAR HYDRAULIC OIL shows very little change in its flow characteristics through its service life. The better quality base oils and superior additives in large quantities helps ANTIWEAR HYDRAULIC OIL maintain its viscosity and performance – – for dependability!

Size

19 ltr Pail