HYDRAULIC OIL Resists Chemical Breakdowns
Hydraulic oils are subjected to many problem- causing factors – – high temperatures, water, air, and foreign debris. This combination leads to oxidation, producing sludge, varnish, acids, eventually a thick gummy material in the oil. To prevent this, Texas Refinery Corp. manufactures HYDRAULIC OIL from new generation base oils which have a high stability and then TRC boosts the stability even further with extra portions of powerful anti-oxidation additives. In an oxidation test, HYDRAULIC OIL SAE 10 ISO 32 performed satisfactorily for over 10,000 hours, in most grades – – better than five times the target normally sought.
HYDRAULIC OIL Resists Foaming
For peak efficiency, hydraulic systems must use an uncontaminated oil as an operating medium. Water contamination, among other things, causes foaming, especially where elevated temperatures are encountered. Also, air entrapped in the system, can cause a foaming problem. Texas Refinery Corp.’s HYDRAULIC OIL contains special anti-foam chemistry in large amounts, so the fluid releases any air or water that may be causing the foam. Texas Refinery Corp.’s HYDRAULIC OIL provides superior protection for hydraulic systems including vane pumps. Reducing foam also decreases heat, and improves the life of the oil and the equipment.
HYDRAULIC OIL Protects Seals
A hydraulic piston operates under high pressure, requiring a lubricant which reduces friction of the seal material, without damage to the seal itself. HYDRAULIC OIL is formulated with the most up-to-date additives to protect seals. Friction is reduced and longer service life is obtained. This savings is accomplished by using superior quality oils and additives used in Texas Refinery Corp.’s HYDRAULIC OIL SAE 10 ISO 32 formulation.
Reduces Costly Wear
HYDRAULIC OIL SAE 10 ISO 32 is a high quality, stable product formulated to provide excellent performance. Increased protection against surface wear is accomplished with the use of HYDRAULIC OIL – – it forms a film on metal surfaces, reducing metal to metal contact. Texas Refinery Corp. incorporates more zinc (an anti-wear additive) into its hydraulic oil, than is required on most equipment specifications – – an extra step to prolong the life of equipment. Reducing friction wear often reduces operating temperatures and that in turn helps increase the life of the oil and the equipment.
Protects Against Rust
If an oil is formulated properly, metals should not rust, even if moisture is present. HYDRAULIC OIL has the special additives in large quantities to protect metal surfaces from rust. The film forming chemistry, coats all metal surfaces with a thin film, preventing moisture and other rust promoters from reaching the surfaces. With the use of HYDRAULIC OIL, the worries of rust are over.
HYDRAULIC OIL Is Dependable
An inferior hydraulic oil becomes thick when cold and cause a pump to cavitate. When weather is hot, the oil becomes thin, causing a loss around the seals. The thin oil also tends to accelerate wear and give other problems. HYDRAULIC OIL SAE 10 ISO 32 shows very little change in its flow characteristics through its service life. The better quality base oils and superior additives in large quantities helps HYDRAULIC OIL maintain its viscosity and performance – – for dependability!